Rent

Rent


Formwork (Shuttering) for slabs and beamsPropping scaffolding 1000/1000по договаряне

Propping scaffolding 1000/1000
Propping scaffolding 1000/1000
Propping scaffolding 1000/1000
Propping scaffolding 1000/1000
The propping scaffolding 1000/1000 is designated for the execution of slabs and beams in civil, industrial, transport construction. Because of the small weights of the different elements, the simple assembling and dismantle, relatively big loading (100kN/tower). The propping scaffolding 1000/1000 is especially effective for the implementation of the first floors, heavy slabs and higer floors beams for slabs, keeping the possibility for propping at normal (standart housing) floors. 

Formwork (Shuttering) for slabs and beamsTelescopic propsпо договаряне

Telescopic props
Telescopic props
Telescopic props

Formwork (Shuttering) for walls and columnsPERI DOMINO

PERI DOMINO
PERI DOMINO
PERI DOMINO
DOMINO is the lightweight panel formwork for use in building construction and civil engineering, and for every ground plan. Guaranteed efficient use – even without a crane. With only 4 panel widths and inset tie points, foundations are also extremely easy to realize.Lightweight aluminium panel formwork (yellow), can also be moved by hand Accessories such as corner and stopend panels as well as compensations are available Panels can be used horizontally and vertically due to inset tie points Maximum permissible fresh concrete pressure 60 kN/m² Easy cleaning due to powder-coated elements DRS alignment coupler for standard joints, external and internal corners, obtuse and acute-angled corners, stopend formwork, timber compensations and extensions Used with DW 15 tie system Alternatively, the DKS wedge connector is used for standard panel connections with lower load-bearing requirements (e.g. for foundations)    

Formwork (Shuttering) for walls and columnsPERI LICO

PERI LICO
PERI LICO
PERI LICO

Formwork (Shuttering) for slabs and beamsH20 timber formwork beamsнаем - 0.03 лв./м/ден; продажба - по договаряне

H20 timber formwork beams
H20 timber formwork beams

Formwork (Shuttering) for walls and columnsPush-Pull Prop PERI RSS IIIнаем - по договаряне; продажба - 220 лв.

Push-Pull Prop PERI RSS III
Push-Pull Prop PERI RSS III
Push-Pull Prop PERI RSS III   Extension length l = 4.60 – 6.00 m.   For aligning PERI formwork systems   20 pcs available.

Formwork (Shuttering) for slabs and beamsPropp tripadпо договаряне

Propp tripad
Propp tripad

Formwork (Shuttering) for slabs and beamsTemporary safety parapetпо договаряне

Temporary safety parapet
Temporary safety parapet

Other construction equipment rentalsConcrete slabs for temporary roads 210 cm x 210 cm x 20 cm135 лв.

Concrete slabs for temporary roads 210 cm x 210 cm x 20 cm
Concrete slabs for temporary roads 210 cm x 210 cm x 20 cm
Concrete slabs for temporary roads 210 cm x 210 cm x 20 cm.

Other construction equipment rentalsConcrete reinforced slabs for tower crane roads 65 cm x 35 cm x 595 cmнаем - 36 лв./бр./месец; продажба - 350 лв./бр.

Concrete reinforced slabs for tower crane roads 65 cm x 35 cm x 595 cm
Concrete reinforced slabs for tower crane roads 65 cm x 35 cm x 595 cm
Concrete reinforced slabs for tower crane roads 65 cm x 35 cm x 595 cm

Formwork (Shuttering) for walls and columnsMIDIPLUS ROUND circular formworkнаем - по договаряне; продажба - 4500 лв.

MIDIPLUS ROUND circular formwork
MIDIPLUS ROUND circular formwork
MIDIPLUS ROUND circular formwork
MIDIPLUS ROUND circular formwork
Comprises a 14 cm thick steel frame and a (100% birch) multiply panel with phenolic coating on both surfaces. The system is used to create perfectly circular walls with a minimum radius of 2.5 m. The adjusting nuts on the back of the panel (4 per panel) adjust the curvature radius. The panel's siderail and relative accessories are those used in the MIDIPLUS system, assuring full compatibility between the different systems. MIDIPLUS ROUND can be assembled both horizontally and vertically. The system is used to create curved walls reducing worksite costs, as the panels can be used immediately with the same features as the panel systems. ADVANTAGES: The permissible pressure is 60 kN/m2 in condition of constant pressure or 75 kN/m2 for walls with height of 3 m. With the system MIDIPLUS ROUND 90/99 the variable radius starting from 2.5 m